Water Filled Barriers

The KI 1000 Barrier has been designed specifically as a pedestrian and low speed zone barrier. Its simple interlocking system allows barriers to remain connected while moving through angles 120 degrees each way.

The barriers are fitted with retro reflective tape and have two apertures topside for fitment of hazard lights, pole signage or extended mesh fencing. The barrier also complies with Australian Standard AS1742-3-1996 Traffic Control Devises for works on roads, Section 3.10.1 (C).

Specifications:

• Height: 1,000mm
• Width: 570mm
• Effective Length: 2,000mm
• Overall Length: 2,200mm
• Weight Empty: 32kg
• Weight Full: 387kg
• Water Fill to Top: 355 Litres
• Impact Speed Rating: n/a kph
• Joining System: Interlocking

Provision for:

• Amber Light: YES
• Pole Signage: YES
• Mesh Fencing: YES

(Please note: Fence Top Panel is not included in this listed price and is sold separately)

CLICK & COLLECT or Get Delivered 

You will be presented with Click & Collect and available delivery options at the shipping stage of the check-out

The Shield 1 safety crash barrier is a unique barrier utilizing a high strength modified UV stabilised polyethylene and patented composite design. Made in Australia and approved by road authorities Australia wide.
It is a redirective barrier, easy to install with steel connecting pins. Tested containment MASH test level 1 (2,270kg) at 50km/h and 25 degrees accepted dynamic deflection 2.2 metres. Status-Accepted and may be used on the classified road network.

Specifications:

• Height: 920mm
• Width: 600mm
• Effective Length: 2,000mm
• Overall Length: 2,200mm
• Weight Empty: 81kg
• Weight Full: 611kg
• Water Fill to Top: 530 Litres
• Impact Speed Rating: TL-1, 50km/h
• Joining System: Steel Pin
• Minimum Length of Need: 44m
• MASH Test Level 1: YES
• Road Authority Approved: YES